Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Popular Discussions

    UltraSn0w: Software method to Unlock iPhone 3G running iPhone OS 3.0 Released

    135

    Comments

    • JamezJamez Posts: 4
      via Wordpress

      I've unlock my 3G iphone and it worked great. The only problem is the 3.0 version now drains my battery. Does anyone have the same problem? Any way to fix that problem? Thanks

    • MohammadMohammad Posts: 4
      via Wordpress

      It works quite easy and fast.

    • kennykenny Posts: 42
      via Wordpress

      Hi Bob,

      Do I need to upgrade it thru iTunes (it is then saying to restore to factory settings - loss of media and other data, etc..) or is there any other way?

      I want to be sure before I take another step.

      Thanks, Kenny

    • OrlandoOrlando Posts: 12
      via Wordpress

      And did 3G worked? My Friend Unlock and Jailbreakin a iphone 3g and when i put my tmobile(USA) sim card it only pick up E (Edge) not 3G. Did 3G worked for you?

    • medmed Posts: 2
      via Wordpress

      Where do I go to download this program so that I can unlock/jailbreak my phone? Any info would be greatly appreciated.

    • IrhaIrha Posts: 37
      via Wordpress

      Thanks. Since it was jailbroken, I had a lot of 3rd party application data on it. Assuming I am going to reinstall at least some of them after jailbreaking 3.0, how do I backup and restore that data?

    • AminAmin Posts: 4
      via Wordpress

      It works perfectly, i tried it with my iphone and no error. Thanks Dev Team, keep up the good work. nobody does it better

    • TimWTimW Posts: 430
      via Wordpress

      UK:
      O2
      T Mobile
      Orange
      Fresh
      Virgin
      Vodafone
      3
      UK01 (kiosks-- spectrum interactive)
      Tesco (uses O2)
      Asda (voda)

      all the above sim tested and working.
      UK01 capable of 7.1 mbs not publicly available.

    • LaLaLaLa Posts: 7
      via Wordpress

      sry to bother you! i updated the APN & for some reason its still not working. I was on the phone w tmobile for an hour & still no luck. I didnt tell them i was on an unlocked iphone. It stopped working before the update. Do you know if there's a certain plan i should be on or is there a certain phone i should tell them i have? thanx

    • BOO HOOBOO HOO Posts: 3
      via Wordpress

      love all the work Dev Team :)

      but I'm having a bit of a problem with Apple's software.

      I upgraded to iTunes 8.2, did a backup of the iPhone, and started a 'restore' to 3.0.

      Got an 'unknown error 1604', have tried again and a again but can't get any further. only thing different is I am now seeing an 'unknown error 1603'!! eek!

      I followed all of apples advice on their KB, anybody out there got any advice? all help greatly appreciated :)

    • muthumuthu Posts: 3
      via Wordpress

      Hai,
      Thanks for this unlocking methods.I saw one sitehttp://www.mobileunlocksolutions.com/.In that site contains the unlocking codes and instructions for mobiles.Anyway this software method is very useful to me.Thank U

    • ArmaniusArmanius Posts: 42
      via Wordpress

      if your iphone is password protected make sure to turn it off.

    • ArmaniusArmanius Posts: 42
      via Wordpress

      if you want to jailbreak your iPhone(which you have to do first so you will be able to unlock it) you have to use redsn0w and after you done jailbreaking your iPhone you have to add this repo repo666.ultrasn0w.com to your Cydia and install Ultrasn0w

    • DonDon Posts: 111
      via Wordpress

      Select 'Manage' then go to 'Sources' then select 'Edit' and then select 'add' once key in select 'add source'

    • cmadiamcmadiam Posts: 1
      via Wordpress

      followed all instructions but it doesn't work for me. I have 3G and updated to 3.0 and also jail breaked it before install ultrasnow but now, when i tried to reboot my iphone, only the apple logo appears...

      Can someone help me on this one?

    • Petre CristescuPetre Cristescu Posts: 2
      via Wordpress

      I followed all the instruction and all works fine now.

      To be able to get good and permanent carrier coverage, I had to restore network settings after install ultrasn0w.

      Thanks for all you have done.

    • ErikErik Posts: 47
      via Wordpress

      Hi.

      I have the problem with "No service" after Ultrasn0w is installed.
      Followed every guide 100% and everything goes all the way just fine.
      But after i installed Ultrasn0w and rebooted. Searching, searching and then
      No Service ! :(
      Tried everything. Started all over 10 times, same result.
      What to to ?
      Anybody know of this problem.

      Thx guys.

    • pepenivelpepenivel Posts: 2
      via Wordpress

      Vodafone Spain, iphone 3.0 jailbraked and unlocked following Dev Team´s instructions, working beautifully, THANKS A LOT DEV TEAM!!!! you guys are awesome!!

      Note about something I was doubting: If you have your iphone 2.1 or 2.2 with yellowSn0w you have to update your phone to 3.0 first, then jaibreak it with redSn0w which will install Cydia or Icy in your iphone, then get ultraSn0w thru Cydia or Icy.

    • dsfsdidsfsdi Posts: 1
      via Wordpress

      AT&Ts 3G doesn't work on T-Mobil it's a whole different carrier -_-

    • kennykenny Posts: 42
      via Wordpress

      Hi

      I need to upgrade it thru iTunes (it is then saying to restore to factory settings - loss of media and other data, etc..) or is there any other way?

      I want to be sure before I take another step.

      Thanks, Kenny

    • kennykenny Posts: 42
      via Wordpress

      Hi

      I need to upgrade to OS 3.0 thru iTunes (it is then saying to restore to factory settings - loss of media and other data, etc..) or is there any other way?

      I want to be sure before I take another step.

      Thanks, Kenny

    • radrad Posts: 1
      via Wordpress

      THX It works on Iphone 3G 16GB

    • iphonebooniphoneboon Posts: 1
      via Wordpress

      i have jailbroken and unlocked my iphone with ultrasnow, however every few mins or so i lose reception and no signal bars show. Then after a while its ok.

    • DucDuc Posts: 7
      via Wordpress

      Why does my iphone say "different SIM detected, please connect to itunes" Anyone help please.

    • Chris999Chris999 Posts: 1
      via Wordpress

      It does not work with my Iphone 3g! :( Please help! Maybe a new update for Ultrasn0w?? Please HELP ME!! :)

    • muthumuthu Posts: 3
      via Wordpress

      Hai,
      Thanks to this software.I found one website mobileunlocker.In that site contains unlocking instructions for mobiles.This software also help to unlock.so once again Thanks.

    • muthumuthu Posts: 3
      via Wordpress

      Hai,
      Thanks to this software.I found one website mobileunlocker.In that site contains unlocking instructions for mobiles.This software also help to unlock.so once again Thanks.

    • EdgarEdgar Posts: 12
      via Wordpress

      I have an iphone 3G running 2.2 (jailbroken and unlocked) what is the exact procedure to upgrade my iphone to OS 3.0 without losing the jailbreak and unlock?

      I am using Windows platform

      regards

    • Marcell M.Marcell M. Posts: 1
      via Wordpress

      Does jailbreaking my iPhone 3G with 3.0 with redsn0w restore it or does it do it as an update process? I hate going through restores and restoring from backups and installing apps again.

      Does redsn0w jailbreak by updating it or restoring?

    • ArmaniusArmanius Posts: 42
      via Wordpress

      has anyone tried with T-Mobile in US??

    Sign In or Register to comment.