Is this jailbreak only for Mac users? Where is the Pwnage for PC users? Thanks.
When I had my Iphone 3g on 3.1 jailbroken. It worked fine. When the MMS update came out I kept getting an error when trying to update. I restored the phone back to normal and the update worked fine. Now I went to go back to jailbreak the Iphone again and now I get an error when I choose the restore data that quickpwn made. Any help ? I did the whole use a usb hub to jailbreak.
Im using the latest itunes.
ok here i go i do not want to unlock my 3gs iphone with 3.1 i just want to jailbreack it is that posible i just bought the phone and it had 3.1
when will they come out for the iphone software 3.1 firmware 05.11.07 for PC's, so that i can hack my iphone?
but do you have a mac or pc???
what comp. did you us either a Mac or PC to successfully unlock your phone?????
I have the exact same problem. Is there a way to upgrade baseband? Or do we have to use something other than Ultrasnow to unlock it?
i thought i was good with this stuff...i was able to make the custom firmware using quickpwn on my intel mac mini - even threw a custom boot screen in there.
ipsw created successfully. copied the file via wireless network to my PC running windows 7 with itunes version 22.214.171.124
threw the iphone 3g running firmware 3.1 baseband 5.11.07 into DFU mode - itunes said this device is in recovery mode and needs to be restored - i clicked ok and then shift clicked the restore button...
located the custom firmware created on my mac
and i get this stupid error code 1600 - wtf and FML
drop me any suggestions?
How do you adjust your iphone, so when you attach it to an xbox 360, it will show up in the play list menu like my flashdrive does?
Hi! I am not too good in English, even if i understand good what you writes and stuff, i dont get the "big picture".I have a quite new iphone 3g OS 3.1 it has never been unlocket or jailbroken before. And it has the new baseband.Will the steps on the top of this page work so i can install cydia, and then ****?If it is, should i just start on step 1 and contnue till i am finished, or should i do something else?If it dont work, is the any other alternative, or do i have to wait?
How do you set up the iphone so you can connect it to an x box 360 because mine connects, I just cant play the music off of it.
broken well thanks.... but still dont see my sim card(((
i just jailbroke my phone and once it was done it did not show the carrier. my phone is with rogers, so it doesnt need to be unlocked. any suggestions?
hi! i cant open the .dmg files( i use windows xp), i have tried power iso, and it converted it to files i could open on my desktop, but it seems like the computer does not know witch program it can open the files with... any ideas????
hi wats a cosmetic??? like did anythink happen wen u hacked ur phone like canu get music for free???
"PwnageTool 3.1 is ideal for all those who have iPhone firmware 3.0.1 or lower running on their iPhone 3G as it preserves the baseband but can also be used if you have already upgraded to iPhone OS 3.1." So does this mean you can use this to jailbreak even if you have already upgraded to OS 3.1 or not? This statement seems to say no then yes.
i wondered about the same until i saw this post:
Paul said...All, for those of you new to jailbreaking, or wish to jail break your iPhone 3G running 3.1 with firmware 05.11.07, you can use this process to Jailbreak without worry. I have used this step by step guide to do just that. It ran flawlessly and you should have no anxiety about doing it. At first I was worried because the instructions say you need 3.01 or earlier but you need not worry if you have already upgraded to 3.1.
Reply September 26, 2009 at 05:30 AMiPhoneHacks said in reply to Paul...Thanks Paul, we've updated the guide to avoid the confusion.
BTW: i have asked about something else. Its, well i guess ill just ask again
i cant open the .dmg files( i use windows xp), i have tried power iso, and it converted it to files i could open on my desktop, but it seems like the computer does not know witch program it can open the files with... any ideas????
Hi everyone today I finally did the jb procedure using a friend mac following the steps above,at the end of the restore from backup when the phone turned back on I have a issue that I would like your help to resolve; first the modem baseband is still 05.11.07 not 04.26.08 like is suppose to; it does not recognize the network nor my phone number and I`m not able to make calls, I will appreciate any help thanks.
Desi, It will delete everything from your computer. A Mac will help you build the .ipsw and then just follow the steps after 14 (and you don't have to have the program, just do what the steps say). Once in DFU mode, plug into iTunes and Shift-Click the restore button, select the .ipsw file and let it do it's job.
I meant to say it'll delete everything on your iPhone.
Couple of points that might help:1. Keep "Activate the phone" option checkedif you want to unlock your iPhone or deselect it if you are using anofficial iPhone carrier.2. This guide only jailbreaks your iPhone, if you want to unlock youriPhone, then you can check out the guide to unlock it using UltraSn0w afterjailbreaking your iPhone:http://www.iphonehacks.com/2009/07/step-by-step-guide-to-unlock-iphone-3g-running-on-iphone-os-30-using-ultrasn0w.html**
thanks I`ll try the process again.
your help has been great and i managed to get the jailbreak onto my iphone 3g, but the problem is that the phone now has no network coverage? has anyone got any solutions for this?
I've tried this multiple times in both expert mode, and simple mode, and it has never once activated.
I just did it for the 6th time in 24 hours and I'm just going to resort to a normal factory restore because it will not activate itself no matter what I do, and I'm tired of having a phone that doesn't function.
Any word on PT for 3GS running OS 3.1 yet?I wanted to jailbreak my iPhone for the first time ever, only to realize it's not available yet
Ok so here is my fix to the Error 1604. First off I have to say its all my own fault. I've done the upgrade previously on my Iphone 3.1 and it worked no problem, So I decided to do my wife's. So I followed the same process and lost my carrier capability. Sitting on activation, and every time I tried to do a restore I'd get the 16xx message. The following is how I got my Iphone working again.
1) Reboot your Iphone (it will have no carrier signal)2) Run Itunes3) Press or when selecting the "Restore button".4) Select the 3.1 firmware file (NOT Your Custom Firmware, but the Apple 3.1 firmware)5) Let Itunes put your phone into recovery mode and restore the firmware (This wipes out the jailbreak)
Note: if asked about a carrier update, select "YES"6) When complete "restore" from Itunes backup
The above will get your phone working again it did for me.
So my root problem was that my wife's phone was not running firmware 3.1.
SO DO NOT JAILBREAK with this process unless your running 3.1. My oversight and a huge scare. I'm just happy I was able to get the phone working again.
if i already have my iphone 3g updated to 3.1 before i do this jailbreak will the jailbreak still worrk? and will mms still work after jailbreak? thanks alot
and will my the phone part still work ?
Hi , i have a problem about iphone GSM hack.When applying all things you mentioned above,i can use both cylia and ultrasnow.everything seems ok but gsm (turkcell) does not work .what can the problem be? thanks for your help from now.
anyone with this custom firmware, please upload it online for me to JB on windows!!!