Sn0wbreeze 2.9.5 Adds Support For Revised iOS 5.1.1; Includes Location Services Fix For iPhone 3GS

System
System Posts: 446
via Wordpress in iPhoneHacks.com
imageSn0wbreeze 2.9.5 Adds Support For Revised iOS 5.1.1; Includes Location Services Fix For iPhone 3GS

iH8sn0w has also released a new version of Sn0wbreeze (v2.9.5), which adds support for the revised iOS 5.1.1 that was released by Apple for GSM iPhone 4 users.

iH8sn0w has released Sn0wbreeze v2.9.4, which includes suport for iOS 5.1.1 untethered jailbreak for iPhone, iPad, iPod Touch and Apple TV.

In addition to support for the revised iOS 5.1.1, iH8sn0w has also included a fix for location services for iPhone 3GS users (iPad baseband users).

Read the full story here

Comments

  • russy
    russy Posts: 1
    via Wordpress
    so with sn0wbreeze can I unlock a 4s running iOS 5.1 ?
  • Mike
    Mike Posts: 9
    via Wordpress
    You need to update to 5.1.1 first then jailbreak using the info above with sn0wbreeze or use absinthe 2.2Also the info above about ultrasn0w not working on 5.1.1 Is incorrect. You CAN use ultrasn0w with iOS 5.1.1 but you need to install "Ultrasn0w fixer for 5.1.1" BEFORE you install ultrasn0w. Add source repo.iparelhos.com for Ultrasn0w fixer for 5.1.1
  • Mike
    Mike Posts: 9
    via Wordpress
    Sorry correction. I thought you said jailbreak not unlock. For iPhone 4s you need to purchase a "Gevey ultra s sim card. Purchase online or find a dealer near by. This will unlock your iPhone 4s
  • Elim
    Elim Posts: 59
    via Wordpress
    did it says unlocking using snowbreeze?
  • Ludacris
    Ludacris Posts: 2
    via Wordpress
    If your phone is already unlocked, will upgrading the firmware while preserving baseband keep the unlock or will you need to wait until there is an unlock for 5.1.1?
  • Paul
    Paul Posts: 239
    via Wordpress
    It will keep the unlock kind of as ur need to update ultrasnow from Cydia to work with 5.1.1 ultrasnow isn't updated yet thouStay away from the ultrasnow fixer for 5.1.1 it does work to unlock with iPad baseband but I found it buggy with most my apps not able to open after 1hr of use on 3gs
  • Starscream
    Starscream Posts: 2
    via Wordpress
    I did the same things..everything forks fine.
  • Mahendra kandel
    Mahendra kandel Posts: 1
    via Wordpress
    I have iPhone 4 iOS 5.1 locked at SoftBank Japan network.now I'm in Nepal so I have to unlock it to use any other network sin card plz help me to unlock
  • Paul
    Paul Posts: 239
    via Wordpress
    i guess its just one of them things then 1st safari wouldnt open witch i read is common for the 5.1.1 fixer so i just used skyfire instead then after awhile that wouldnt open plus cydia and a bunch of other appsi had to do a full restore and repeat the 5.1.1 fixer 3times in a day also reinstalled 06.15.00 baseband in the end i got fed up with it crashing and went back to 5.0.1 untill a new ultrasnow is out i even tried to boot with redsnow tethered as i read this can correct apps crashing but didnt helpalso i found that using a stock 5.1.1 with no bb i still couldnt actiavate even with correct sim phone just stuck on searching itunes says no sim and this is on stock 5.1.1 without ultrasnow even installed :-(
  • Mike
    Mike Posts: 9
    via Wordpress
    You guys must be noobs. The 5.1.1 fixer and ultrasn0w work fine on ios 5.1.1. No bugs, no crashes. I unlock iPhones as a second job. I have unlocked 33 iPhone 3GS's since the 5.1.1 untethered was released. Just do the steps in the correct order. Install the 5.1.1 fixer BEFORE installing ultrasn0w
  • Mike
    Mike Posts: 9
    via Wordpress
    Ludacris: if you have iPhone 4 and you update to 5.1.1 even with your baseband preserved you will still lose your unlock. For now. Preserving your baseband will make it so it can be unlocked again in the future when there is an exploit available for iPhone 4 but for now you WILL lose your unlock. (this info is only for iPhone 4 users on gsm)
  • mike
    mike Posts: 489
    via Wordpress
  • Esteban
    Esteban Posts: 1
    via Wordpress
    Works on ipad2 5.1????
  • Tjalling
    Tjalling Posts: 1
    via Wordpress
    Hi there, I have jailbroken my iphone 4 with absinthe 2.0.2 on firmware ios 5.1.1 (9B208)Now im having issues with the location service. I can use my maps. But the apps don't word with the location services!Can someone help me please????
  • Mosses Hayes
    Mosses Hayes Posts: 1
    via Wordpress
    Hello I have an iphone 4 on 5.1.1 that I already jailbreak and Cydia is installed. I tried to Unlock it SAM, but I can't. I tried Rocky Racon, Still no success. How can I UNLOCK my iphone 4 on 5.1.1 to use it for Simple Mobile.Please help and you can email me at [email protected]
  • Martin
    Martin Posts: 53
    via Wordpress
    I was on 5.1 with tethered jailbreak (by redsnow) with gevey unlock. Sn0wBreeze helped me to make the untethered jailbreak and upgrade firmware to 5.1.1 while preserving baseband. Phone is still unlockable with Gevey :)Thanks a lot guys!
  • Martin
    Martin Posts: 53
    via Wordpress
    iPhone 4, baseband 04.10.01
  • Eric
    Eric Posts: 238
    via Wordpress
    I can't get my iPhone 4 5.0.1 with original baseband to get into Pwned DFU mode with iReb v5. :/I haven't had an issue with this before. All it does it restarts the phone with the Apple logo.Any ideas on what to do?
  • vwjetta
    vwjetta Posts: 6
    edited June 2012
    guyz I have an Iphone 4 bb 01.59.00 v.4.3.3 ... if i use sn0wbreeze to upgrade to 5.1.1 ... now I can unlock because ultrasn0w its updated and is compatible with 5.1.1?
    Post edited by vwjetta on
  • vwjetta
    vwjetta Posts: 6
    edited June 2012
    Is there an updated step by step procedure?
  • vwjetta
    vwjetta Posts: 6
    edited June 2012
    All work fine my bb was preserved but after using ultrasn0w... net, signal, phone calls, wifi ok but no data because there no recognition of the Operator... any help?

    I used to take out the SIM and after JB, I put on the non original SIM card (always work fine in that way)